Types of Pipe Fittings

Types of Pipe Fittings – Explained by Bhansali Steel

There are different types of pipe fittings used in piping systems. Elbows, tees, reducers, unions, couplings, crosses, caps, swage nipples, plugs, bushings, adapters, outlets, valves, and flanges are the most frequent.

Pipe fittings are as numerous and perplexing to an untrained homeowner as choosing the appropriate screw or nail for a building project. The materials differ, and the specific purpose, while precise, appears difficult to determine. Our Houston and Rosenberg plumbers can help you repair or repipe your yard. We can repair and repipe gas and water lines; whatever you require, our plumbers can assist! Here’s a quick rundown of pipe fittings, their uses, and the materials available.

Pipe fittings are obviously affixed to the ends of pipes and allow them to change direction, control flow, and adjust the diameter of the pipe. As a non-trivial component of plumbing and piping systems, speaking with us is strongly encouraged to save you time, money, materials, and headaches.

Bhansali Steel is a significant Pipe Fittings Manufacturer in India. We supply high-quality Stainless Steel Pipe Fitting, and ASME/ANSI B16.9 Pipe Fittings to a variety of industries all around the world.

Types of Pipe fittings and their purposes:

We stock the largest Types of Pipe Fittings, as well as the following connections:

Pipe Fittings Elbow:

To alter the angle or direction of a pipe run. 90-degree and 45-degree turns are the most prevalent. The fitting’s sweep specifies how quickly a transition or change in direction occurs.

Bhansali Steel manufacture Pipe Fittings Elbow in a variety of thicknesses, specifications, grades, and dimensions. 

Pipe Fittings Elbow Manufacturer in India –>


Pipe Fittings Tee:

Nowadays, the most common pipe fitting or connector is the pipe tee. It serves the same purpose as olets in that it accepts a branch connection for a linear pipeline. The design is T-shaped, as the name implies, with two outputs at 90° to the main line connection.

We are one of the largest Pipe Fittings Tee Manufacturers in India. The Various types of Pipe Fittings Tee we supply are Titanium Pipe Fittings Tee, Hastelloy Fittings Tee

Pipe Fittings Tee Manufacturers in India –>


Pipe Fittings Cross:

Pipe crosses, also known as four-way fittings, have one inlet and three outlets and are frequently equipped with solvent-welded socket or female-threaded ends. The threads are designed to establish a solid grip and secure connection to male pipe fittings and are positioned at 90-degree angles on both ends.

Pipe Fittings Cross Manufacturer in India –>


Pipe Fittings Reducer:

A pipe reducer is a pipe fitting that joins two bigger pipes together. As a result, it reduces the pipe size in the pipe system from one size to another. Pipe reducers are commonly used to join pipes of varying sizes.

We understand our customer’s needs and deliver the best Pipe Fittings Reducer available.

Pipe Fittings Reducer Manufacturer in India –>


Pipe Fittings End Cap:

This is an SWR pipe fitting that can be used in the plumbing network to close a branch line flowing drainage line. USP: Used in branch line closure during initial leakage testing and permanent line closure.

The Various types of Pipe Fittings End Cap we supply are Titanium Pipe Fittings End Cap, Hastelloy Pipe Fittings End Cap and more.

Pipe Fittings End Cap Manufacturer in India –>


Pipe Fittings Bend:

Any offset or change of direction in the piping is referred to as a bend. It is a broad phrase that covers elbows. An elbow is a type of engineering phrase that might be 90 degrees or 45 degrees, with a short or large radius.

Elbows are subject to industrial standards and have size, bend radius, and angle restrictions.

Pipe Fittings Bend Manufacturer in India –>


Pipe Fittings Stub End:

A Stub End is a small length of pipe having one flared end and one square-cut end that is welded with pipe of the same NPS diameter, material grade, and schedule as the Stub End.

Chemical Industries, Steel Factories, Petrochemical Industries, Fire Prevention Systems, and other industries use our high-quality Pipe Fittings Stub End.

Pipe Fittings Stub End Manufacturer in India –>


Pipe Fittings Nipple:

A nipple is a fitting in plumbing and piping that consists of a small section of pipe with a male pipe thread at each end for connecting two other fittings.

Standard black and galvanised nipples are available in pipe sizes ranging from 1/8″ to 8″ and lengths up to 12″.

Pipe Fittings Nipple Manufacturer in India –>


Download Types of Pipe Fittings PDF

These were the different types of Pipe Fittings which are availabe at Bhansali Steel. We are also Stainless Steel Pipe Fittings Manufacturer in India & Carbon Steel Pipe Fittings Manufacturer in India. All of the above types of Pipe Fittings are available at Bhansali Steel.

For more information, contact us today at +91 96196 12233 | info@bhansalisteels.com